The midnight coder

I used the same SD card I had used in one of my Raspberry pis in a different Raspberry Pi board, and after rebooting it did not show up on t...

Prerequisites: My Pogoplug is running Debian Wheezy with a custom 3.14 Kernel (see other posts in this blog for install instructions). I...

Recently I set up a VeraLite z-wave home automation controller from MiCasaVerde . My main goals are to use this for home energy monitoring ...

I wanted to set up a PogoPlug with an HTTP(S) server, PHP support and MySQL so I can use it for logging my home automation data (e.g. energ...

I wanted to put a cheap display on my Seagate Dockstar that I am currently using as Internet Radio and AirPlay receiver (using mpd and mpc)....

Make the following modifications to turn the front LED green when the boot process is completed and turn the LED off when it's save to u...

USB drives are getting bigger and cheaper. Here are the steps I used ot move my Debian Wheezy installation from a 4GB USB drive to an 8GB US...

I got myself another cheap PogoPlug E02 from  Adorama . It is sold as a model P21, but I actually got the E02, which is nicer (better proce...

Step 1: Disable the Pogoplug services - SSH into the DockStar - command: "killall hbwd" Step 2: Attach and configure the USB d...

I read somewhere recently that C# 4.0 will also have optional parameters, like VB6 and VB.Net had all along. When moving to .Net I decided n...